Once the window film has been installed, it’s very common to see a slight haziness and/or small water ripples/pockets. This is a normal part of the adhesive bonding process called “curing”. Depending on the film type and weather conditions, it may take up to 30 days for the film to be fully cured. The curing process is slow because the moisture between the film and glass must evaporate through the film after the installation is completed. Sputtered and heavy security films such as 8 mil or higher may take the longer to dry and may take even longer for any hazy appearance to disappear.

Care and Maintenance

The window film should not be clean or touch during the “curing” progress, once the film is dry and cured, it’s then safe for the film to be cleaned. The best cleaner is a damp towel and a dry towel. You may also clean the film surface with any normal strength glass cleaner. Products with amonia will not damage the film however caution should be used, if used in an unreasonable quantity or if the film is left to soak in it the amonia will cause the life expectancy of the film to decrease.

• Don’t
  use any abrasive cleaners, industrial strength glass cleaners and/or any other window cleaning tools that may scratch the window film. Remember the surface of the film is coated with a scratch resistant it’s not scratch proof coating.

If you have other questions or concerns, give Sun Shield Window Tint a call (281) 748 – 5660. Our Master technicians will be gladly to assist you and answer any question you may have. Don’t forget Sun Shield Window Tint will be opening a second location in the Downtown Area for more information visit Houston Mobile Window Tint

City of Sugar Land

First Colony a community in southwest Houston. First Colony is a unique blend of residential
neighborhoods and businesses with protective architectural guidelines and meticulously maintained streets, lakes, parks, and greenbelts. First Colony Community Association office is located at 4350 Austin Parkway, Sugar Land, TX 77479
Visit the official First Colony website

First Colony Community Association (FCCA) developed Guidelines to assist homeowners in complying with deed restriction requirements for modifications. Some Guidelines stipulate that residents get prior approval for certain modifications read more….

Sugar Land, TX | First Colony Window Tinting Film

Window Film may be installed on the front, side, or back of the house. No Window Film is allowed unless the visible light reflected is 35% or less.

Acceptable Colors 

• Gray
• Charcoal
• Crystal/light silver clear film

Absolutely no mirrored, fully reflected bronze or any other colored films is allowed on any windows. First Colony Guidelines PDF

Sun Shield Window Tint can assist you with any residential window tinting project. We understand residential window tinting can be a complicated subject. We aim to help you find the best window film base on your window tinting needs. Call us today! (281) 748 – 5660 to set up your FREE tinting consultation or use our window tint quote for an approximate estimate.

Metallic Window Film – Problem

Today’s cars come fully equipped with so many gadgets that it’s almost possible for them to drive themselves. Newer vehicles often feature complex electronics systems, such as satellite radio that provides customized entertainment and the latest traffic conditions, GPS navigation to get the driver where he wants to go when he’s lost, keyless entry systems provide safe entrance to the vehicle, remote start allows the driver to start their vehicle from a distance so by the time they get in their vehicles it may be cool or warm already, tire pressure sensors tell drivers when their tires get too low, and radar detectors designed to avoid speeding tickets.

To work properly, these devices rely on antennas that receive signals from things as far away as the heavens (satellites) or as closeby as the next parking space (a remote control for keyless entry). Sometimes those antennas are on the roof, but other times they’re in the rear window. And, that’s where the problem comes in for Metallic Window Films. When metallized films are installed over those antennas, they interfere with the signals. That means a driver may not be able to enjoy the high technological features of his vehicle.

Ceramic Window Film – Solution

Metal films provide exceptional heat rejection and are highly durable, but they cause interference with rear window electronic systems. Dyed films are non-conductive, but they don’t last as long and they don’t provide the best heat rejection. Ceramic films provide the best of both worlds. Ceramic films also offer better visibility by reducing the reflective qualities of metallized window film while increasing the visible light transmission. This gives you a lighter film with higher heat rejection. It is why Sun Shield Window Tint only uses ceramic window films, Omar Mayorga says ”Our customers are important and they always come first”. As a huge car enthusiastic Anthony Mayorga says, ” Here at Sun Shield Window Tint, We Always treat our customers car as our own”.  Make Your appointment today and allow us to show you that our service is well-worth.

Choose a colored window tint if you want to go for the fancy look. Sun Shield Window Tint can customize your window tinting shade to match your car. Consider the color of your vehicle’s interior and exterior as those two items effect the appears the window tinting film. Dark interiors and exteriors will make the window tinting film appear darker than light interiors and exteriors.

Pick a dark window tinting shade to maximum privacy. Remember the darker the window tint the more light it blocks(not heat). Caution limo window tinting (05%) may obstruct your night vision.

 
Always select a car window tinting shade that is legal. Police don’t hesitate to give tickets for window tint that’s too dark.  Tints, like limousine tint, in the front windows of your automotive . A Sun Shield Window Tint representative can tell you if the shade you want is legal in your area.

Get a strip on the top of your windshield that matches the tint on the rest of the car. This strip works like a sunshade to keep the sun out of your eyes while driving, and it also has a sporty look to it.

This is true for most vehicles, however certain makes and models don’t have a felt layer on the window canal of the door. Their manufacturers neglected to put this felt on the inside seal of the window. This inside window seal is made of hard plastic. With no felt applied to it, this hard weather strip will start to collect dirt and dust which in turn rubs against your vertical lines and scratches. 

Streaks & Scratches

This looks cosmetically bad and it destroys the window film causing you to have to return to the tint shop and re-tint the car all over again. Fortunately there is a solution to this problem, simply install the felt layer on your window canal, Call us today (281) 748 – 5660 and we can order a strip of felt specifically for your vehicle or order here.

Before you get your auto tinted, find out if your vehicle is one of those whose manufacturer neglected to put this felt on the inside seal of the window. You can contact Sun Shield Window Tint and one of our representative can help you answer this question and others you may have. Also remember you can virtually tint your vehicle here